Roland CX-300, User Manual

Page: 59 / 64

59
Mechanism
Driving method
Maximum cutting area
Acceptable media widths
Width of material that
can be cut off
Tools
Max. cutting speed
Cutting speed
Blade force
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Interface
Buffer size
Instruction system
Switches
Control keys
LED
Display
Power consumption
Acoustic noise level
Dimensions
Weight
Operating temperature
Operating humidity
Accessories
10 Specifications
Cutter blades: Special blade for CAMM-1 series
During cutting: 850 mm/sec. (in all directions) During tool-up: 1202 mm/sec. (in 45° direction)
10 to 850 mm/sec. (in increments of 10 mm/sec.)
20 to 350 gf
0.0125 mm/step (0.000492 in./step)
0.025 mm/step (0.000984 in./step)
Error of less than ± 0.2% of distance traveled, or 0.1mm (0.00394 in.), whichever is greater
0.1 mm or less (excluding stretching/contraction of the material)
Range for assured repetition accuracy (*)
For materials with a width exceeding 610 mm (24 in.): Length 4,000 mm (157-7/16 in.) (CX-500/400 only)
For materials with a width of 610 mm (24 in.) or less : Length 8,000 mm (314-15/16 in.)
Parallel (Centronics compatible), USB (Rev 1.1)
2 MB (1.3 MB for replot buffer)
CAMM-GLIII (mode1 and mode2)
Power switch, Pen force slider
PRESET, FORCE, SPEED, ORIGIN, MENU, ENTER, PAUSE, SHEET CUT, TEST CUT, , , ,
POWER/ERROR LED, SETUP LED, PAUSE LED
Liquid crystal display unit: 20-character by 2 lines
Maximum: 0.8A/100V to 240V ± 10% 50/60 Hz
Cutting mode: under 62dB (A) Standby mode: under 40dB (A)
(According to ISO 7779)
Width: 737 mm (29 in.)
Length: 24998 mm (984-1/8 in.)
Min. 50 mm (2 in.)/ Max. 915 mm (36 in.)
(50 to 540 mm (2 in. to 21 in.),
582 to 915 mm (23 in. to 36 in.))
0 to 812 mm (0 in. to 32 in.)
CX-300
Main unit
With stand
Main unit
With stand
For items indicates by an asterisk “*”, please see the next page.
Width: 1000 mm (39 in.)
Length: 24998 mm (984-1/8 in.)
Min. 90 mm (3-1/2 in.) /
Max. 1178 mm (46 in.)
0 to 1067 mm (0 in. to 42 in.)
CX-400
Width: 1195 mm (47 in.)
Length: 24998 mm (984-1/8 in.)
Min. 90 mm (3-1/2 in.) /
Max. 1372 mm (54 in.)
0 to 1270 mm (0 in. to 50 in.)
CX-500
Media-movement method
Digital control servo motor
1144 mm (W) x 264 mm (D) x 398 mm (H)
(45-1/16 in. (W) x 10-3/8 in. (D) x 15-11/16 in. (H))
1144 mm (W) x 727 mm (D) x 1113 mm (H)
(45-1/16 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H))
27 kg (59.5 lb.)
46 kg (101.4 lb.)
1407 mm (W) x 264 mm (D) x 398 mm (H)
(55-3/8 in. (W) x 10-3/8 in. (D) x 15-11/16 in. (H))
1407 mm (W) x 727 mm (D) x 1113 mm (H)
(55-3/8 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H))
32 kg (70.5 lb.)
53 kg (116.8 lb.)
1602 mm (W) x 264 mm (D) x 398 mm (H)
(63-1/16 in. (W) x 10-3/8 in. (D) x 15-11/16 in. (H))
1602 mm (W) x 727 mm (D) x 1113 mm (H)
(63-1/16 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H))
38 kg (83.8 lb.)
59 kg (130.1 lb.)
5 to 40°C (41 to 104°F)
35 to 80% (non-condensing)
Power cord x 1, Blade holder (XD-CH3) x 1, Blade x 1, Alignment tool x 1, Cable clamp x 1, Replacement blade for
separating knife x 1, Roland software package CD-ROM x 1, Startup Manual x 1, To ensure safe use x 1
10-1 Specifications