background image

22

Turning the Power On/Off

Once the connections have been completed, turn on power to your 

various devices in the order specified. By turning on devices in 

the wrong order, you risk causing malfunction and/or damage to 

speakers and other devices.

Before switching the power on/off, always be sure to turn the 

volume down. Even with the volume turned down, you might hear 

some sound when switching the power on/off. However, this is 

normal and does not indicate a malfunction.

Turning the Power On

1. 

Turn the [Master Volume] knob all the way toward the left to 

minimize the volume.

2. 

Press the [Power] switch to turn it on.

On

Off

The basic screen appears in the display.

This unit is equipped with a protection circuit. A brief interval (a 

few seconds) after power up is required before the unit will operate 

normally.

The explanations in this manual include illustrations that depict 

what should typically be shown by the display. Note, however, that 

your unit may incorporate a newer, enhanced version of the system 

(e.g., includes newer sounds), so what you actually see in the display 

may not always match what appears in the manual.

3. 

Use the [Master Volume] knob to adjust the volume.

Turning the [Master Volume] knob towards “Max” increases the 

volume; turning the knob towards “Min” decreases the volume.

Turning the Power Off

1. 

Turn the [Master Volume] knob all the way toward the left to 

minimize the volume.

2. 

Press the [Power] switch to turn it off.

On

Off

Summary of Contents for Atelier Combo AT-350C





































































































































Reviews: