Roland Atelier Combo AT-350C Owner'S Manual Download

Page: 52 / 132

Realistically Expressing Acoustic Instrument Performances

(SuperNATURAL Voices)

Acoustic instruments are noted for their richly varied tonal changes and the diversity of their performance techniques; these are indispensable

elements that produce the distinctive charm of such instruments. “SuperNATURAL voices” are special voices that are able to realistically express the

sounds and performance techniques of these acoustic instruments.

Selecting a SuperNATURAL Voice

SuperNATURAL voices can be selected only for the Solo part.

Press one of the Solo part voice buttons.

A SuperNATURAL voice will be selected.

If you want to switch to the other SuperNATURAL voice assigned to the button, press the [Alternate] button.

Summary of Contents for Atelier Combo AT-350C





































































































































Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands

Roland Atelier Combo AT-350C, Owner'S Manual

Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands