Roland Atelier Combo AT-350C Owner'S Manual Download

Page: 39 / 132

Per

forming

Adding Modulation to the Sound (Rotary Effect)

Rotary is an effect which simulates the sound of rotating speakers.
There is a choice of two settings: Fast and Slow.

Select the voice to which you wish to apply the Rotary effect.

Press the Rotary Sound [On/Off] button (confirm that its indicator is lit).

The Rotary effect will be applied to the voice.

Press the Rotary Sound [Fast/Slow] button to switch between Rotary Fast (Lit) and Rotary Slow (Unlit).

Rotary Sound [Fast/Slow] button

Effect

Lit (Fast)

The effect obtained is equivalent to speakers being rapidly rotated.

Unlit (Slow)

Effect simulating the slow rotation of speakers.

When you switch the rotary effect from “Fast” to “Slow,” the modulation will slow down gradually, and when you switch from “Slow” to “Fast” the

modulation will speed up gradually.

MEMO

•

The function of the Rotary Sound [Fast/Slow] button can be assigned to the foot switch of the pedalboard (PK series; sold separately) (p. 93).

•

For details on voices to which the rotary effect can be applied, refer to “Voice & Rhythm List.”

Summary of Contents for Atelier Combo AT-350C





































































































































Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands

Roland Atelier Combo AT-350C, Owner'S Manual

Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands