Roland Atelier Combo AT-350C Owner'S Manual Download

Page: 16 / 132

Panel Descriptions

[Utility] button (p. 90)

This button takes you to the Utility menu.

[Display/Exit] button

This button returns you to the previous screen or cancels an

operation.

Menu [

] [

] buttons

These buttons select parameters.

Value [-] [+] buttons

These buttons select a song or rhythm, or edit the value of a setting.

Display (p. 23)

This shows information such as the rhythm name or song title.

[Load] button (p. 70)

This button loads a registration set or song into the ATELIER.

[Save] button (p. 68, p. 81)

This button saves a registration set or performance data.

Beat indicator (p. 62)

This indicator will blink in time with the tempo or time signature.

Composer (p. 74)

These buttons let you record your performance or play back a song.

[Song] button

[Registration] button

[Media] button

Track buttons

[Bass] button

[Lower] button

[Solo/Upper] button

[Reset] button

[Play/Stop] button

[Rec] button

[Bwd] button

[Fwd] button

Summary of Contents for Atelier Combo AT-350C





































































































































Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands

Roland Atelier Combo AT-350C, Owner'S Manual

Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands