Roland Atelier Combo AT-350C Owner'S Manual Download

Page: 30 / 132

Selecting a voice of the [Others] button

Each part has an [Others] button. By using the [Others] button you can select voices other than organ, such as violin or flute.

Press the [Others] button for the Part for which you wish to specify a voice.

The voice name appears in the display.

While the voice name is shown in the display screen, use the Value [-] [+] buttons to select the desired voice.

The indicator of the selected [Others] button will blink.

MEMO

•

You can jump by voice group by pressing Menu [

] [

] buttons to select the voice.

•

To stop mid-way through this or any procedure, press the [Display/Exit] button.

Once again, press the [Others] button for the part whose sound you wish to set to confirm the voice.

The indicator of the [Others] button will change from blinking to light.

MEMO

For details on the voices that can be selected with the [Others] buttons, refer to “Voice & Rhythm List.”

Summary of Contents for Atelier Combo AT-350C





































































































































Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands

Roland Atelier Combo AT-350C, Owner'S Manual

Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands