Roland Atelier Combo AT-350C Owner'S Manual Download

Page: 33 / 132

Per

forming

Playing a Vintage Organ Voice

Press the Vintage Organ [On/Off] button so its indicator is lit.

Each time you press the button, the indicator will alternate between ON (lit) and OFF.

The Vintage organ screen appears.

Slide the harmonic bars that you want to hear.

When a harmonic bar is pulled out all the way (8), the volume is loudest. When it is pushed in all the way (0), there will be no sound.

MEMO

The harmonic bar for the Solo part adjusts the volume of the voice that’s selected for the Solo part.

Glide and sustain effects are not applied to the Vintage Organ voice.

Adding sparkle to the sound (percussion)

This adds an attack sound to the beginning of the note, making the sound crisper.

Press the Percussion [4’] button or the Percussion [2 2/3’] button so its indicator is lit.

Play the Upper keyboard and notice that an attack has been added.

Button

Explanation

Percussion [4’] button

Percussion one octave above

Percussion [2 2/3’] button

Percussion one octave and a fifth above

The Percussion [4’] button and the Percussion [2 2/3’] button are valid only for vintage organ voices of the upper part.

When the Percussion [4’] button or the Percussion [2 2/3’] button are on, the 1’ pitch will not be produced.

Summary of Contents for Atelier Combo AT-350C





































































































































Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands

Roland Atelier Combo AT-350C, Owner'S Manual

Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands