Roland Atelier Combo AT-350C Owner'S Manual Download

Page: 17 / 132

Panel D

escriptions

Panel Descriptions

Rhythm select buttons (p. 58)

These buttons select and play rhythms.

Rhythm button

Tempo [

] [

] buttons (p. 62)

Arranger [On/Off] button (p. 62)

Auto [Fill in] button (p. 63)

Variation [1]–[4] buttons (p. 63)

[Intro/Ending] button (p. 60)

[Start/Stop] button (p. 60)

Rotary sound buttons (p. 39)

These buttons add modulation to the sound.

[On/Off] button

[Fast/Slow] button

Harmonic bars (p. 32)

Use these bars to shape the organ sound.

Registration buttons (p. 67)

Use these buttons to recall or store registrations.

[Write] button

[Manual] button

Registration [1]–[8] buttons

Summary of Contents for Atelier Combo AT-350C





































































































































Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands

Roland Atelier Combo AT-350C, Owner'S Manual

Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands