Roland Atelier Combo AT-350C, Owner'S Manual

Page: 69 / 132

69
St
oring
Your P
er
formanc
e S
ettings (Registr
ation)
8.
Press the Value [-] [+] buttons to select the format in which the data will be saved.
Display Explanation
ORIGINAL
Save formats that can be used with the AT-350C. When saved in this format, the data can also be used by AT-S
series, AT-900, AT-900C AT-800, AT-500, AT-300, AT-100, AT-75, AT-45 and AT-15 devices.
R-SERIES Save formats that can be used with AT-R Series devices.
9.
Press the [Save] button.
Saving of the registration data will begin.
When saving ends, the “------------” in the screen will change to the registration name that you saved.
*
Never remove the USB memory or turn off the power while the operation is in progress. Doing so will damage the ATELIER’s internal memory or
USB memory, making it unusable.
If the following screen appears
If you select a number at which a registration has already been saved and press the [Save] button, the following screen appears.
If you wish to update the contents of the Registration data
1.
Press the [Rec] button.
The Registration will be rewritten.
If you wish to save new data instead of updating the registration
1.
Press the [Reset] button to cancel the procedure.
Rewriting of the Registration will be canceled.
2. Press the Value [-] [+] buttons to select a number for which “------------” is displayed on the upper right of the screen.
3.
Press the [Save] button to save the Registration set.
When saving is complete, the saved registration name will be displayed.