Roland Atelier Combo AT-350C Owner'S Manual Download

Page: 65 / 132

Per

forming with R

hythms

Deleting a Rhythm from User Memory or USB Memory

You can delete rhythms stored in User memory or USB memory.

Select the rhythm you want to delete (p. 58).

Press the [Load] button and [Save] buttons simultaneously.

The following display appears.

To cancel the procedure, press the [Reset] button.

Press the [Rec] button.

While the Rhythm is being deleted, the following screen will be displayed.

When saving is complete, the basic screen reappears.

Never turn off the power while the operation is in progress. Doing so will damage the ATELIER’s internal memory or USB memory, making it

unusable.

Summary of Contents for Atelier Combo AT-350C





































































































































Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands

Roland Atelier Combo AT-350C, Owner'S Manual

Search results

Summary of Contents for Atelier Combo AT-350C

Reviews:

Related manuals for Atelier Combo AT-350C

Brands by name

Popular brands