Roland Atelier Combo AT-350C, Owner'S Manual

Page: 23 / 132

23
Getting Ready
Viewing the basic screen
The ATELIER has three types of basic display screen: the Rhythm
Screen, the Composer Screen and the Registration Screen.
You can alternate from one to the other by pressing the
[Display/Exit] button.
Rhythm Screen
Tempo
Rhythm Name
Beat Measure
Chord Name
Composer Screen
Tempo
Song Name
Beat Measure
Chord Name
Registration Screen
Next Registration set Name
Refer to “Load Next
Function” (p. 72).
Registration set Name
Tempo Beat Measure
Chord Name
Connections
Connecting to Output Device
You can connect the ATELIER to output devices such as speakers, and
use them to listen to the ATELIER’s sound.
The ATELIER does not have built-in speakers. To have sound be
reproduced, you’ll need to connect monitor speakers or a stereo set; or
you can connect headphones.
MEMO
To make connections, use audio cables that have 1/4-inch phone
plugs and that do not contain resistors.
*
To prevent malfunction and/or damage to speakers or other devices,
always turn down the volume, and turn off the power on all devices
before making any connections.
1. Turn down the volume all the way on all equipment.
2. Turn off the power to the ATELIER and other connected
equipment.
3.
Connect the ATELIER and other equipment with audio cables
(sold separately).
4.
Turn on the ATELIER.
5. Turn on the connected equipment.
6.
Adjust the volume.
Turning Off the Power
1.
Turn down the volume all the way on all equipment.
2. Turn off the connected equipment.
3. Turn off the ATELIER.
Connection example
Home use
Main Out jack
Powered speaker
(Amplifier contained within)