FEDL22620-01
ML22620
CLOOP command
・
Command
1
0
0
1
CH3
CH2
CH1
CH0
1st byte
The CLOOP command releases repeat playback of the specified channel. This command can be input regardless of the NCR
signal status.
Setting the CH0 to CH3 bit to "1" cancels repeat playback of the corresponding channel. When repeat playback is released,
the NCR signal becomes "H" level.
The channel settings are as follows:
Channeled
Description
CH0
Setting this bit to 1 cancels repeat playback on channel 0.
CH1
Setting this bit to 1 cancels repeat playback on channel 1.
CH2
Setting this bit to 1 cancels repeat playback on channel 2.
CH3
Setting this bit to 1 cancels repeat playback on channel 3.
Be sure to specify one of the channels for the channel setting (CH0-CH3).
Do not input it to "0" (all “0”) with specifying nothing. If it is input with specifying nothing (all "0"), the command is ignored.
For the timing of the CLOOP command, refer to the "Repeat playback setting/release timing by SLOOP/CLOOP command"
in the timing chart.
75/115
Summary of Contents for LAPIS Semiconductor ML22620
Page 106: ...FEDL22620 01 ML22620 106 115...
