Rohm LAPIS Semiconductor ML22620, Manual

Page: 83 / 115

FEDL22620-01
ML22620

PLAY2 command
・
Command 1 1 0 0 1 0 0 0 1st byte
0 0 C1 C0 F11 F10 F9 F8 2nd byte
F7 F6 F5 F4 F3 F2 F1 F0 3rd byte
The PLAY2 command is played by specifying channels and phrases. This command can be input when the NCR signal of the
corresponding channel is "H" level.
The phrases (F11-F0) to be played back are specified when creating sound ROM data. Set the phrase specified when creating.
The channel settings are as follows:
C1 C0 Description
0 0 Channel 0
0 1 Channel 1
1 0 Channel 2
1 1 Channel 3
When the number of phrases to be played is 1024 or less, the channels and phrases can be specified by PLAY command.
For the playback start timing by the PLAY2 command, refer to the "Playback start timing by PLAY2 command" in the
timing chart.
83/115