manualshive.com logo in svg

Rohde & Schwarz FSMR3000, Getting Started

Share
Download
Rohde & Schwarz FSMR3000 Getting Started Download Page 96

Operating the Instrument

R&S

®

FSMR3000

96

Getting Started 1179.0100.02 ─ 01

7.5

 

Displaying Results

The R&S

 

FSMR3 provides several instrument applications for different analysis

tasks and different types of signals, for example the Measuring Receiver applica-
tion, the Spectrum application or the I/Q Analyzer. For each application, a new
measurement channel is created and displayed in a separate tab on the screen.

The results of a measurement channel can be evaluated in many different ways,
both graphically and numerically. For each evaluation method the results are dis-
played in a separate window in the tab.

The R&S

 

FSMR3 allows you to configure the display to suit your specific require-

ments and optimize analysis.

7.5.1

 

Activating and Deactivating Channels

When you activate an application, a new measurement channel is created which
determines the measurement settings for that application. The same application
can be activated with different measurement settings by creating several chan-
nels for the same application. Whenever you switch channels, the corresponding
measurement settings are restored. Each channel is displayed in a separate tab
on the screen.

An additional tab ("MultiView") provides an overview of all currently active chan-
nels at once.

Only one measurement can be performed at any time, namely the one in the cur-
rently active channel. However, in order to perform the configured measurements
consecutively, a Sequencer function is provided.

Displaying Results

Summary of Contents for FSMR3000















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands