manualshive.com logo in svg

Rohde & Schwarz FSMR3000, Getting Started

Share
Download
Rohde & Schwarz FSMR3000 Getting Started Download Page 84

Operating the Instrument

R&S

®

FSMR3000

84

Getting Started 1179.0100.02 ─ 01

●

Using other elements provided by the front panel, e.g. the keypad, rotary
knob, or arrow and position keys.

The measurement and instrument functions and settings can be accessed by
selecting one of the following elements:

●

System and function keys on the front panel of the instrument

●

Softkeys on the touchscreen

●

Context menus for specific elements on the touchscreen

●

Icons on the tool bar in the touchscreen

●

Displayed setting on the touchscreen

7.2.1

 

Toolbar

Standard functions can be performed via the icons in the toolbar at thetop of the
screen.

You can hide the toolbar display, e.g. when using remote control, to enlarge
the display area for the measurement results ("Setup > Display > Displayed
Items"). See the R&S

 

FSMR3 User Manual for details.

The following functions are available by default:

Table 7-4: Standard Application Functions in the Toolbar

Icon

Description

Windows: displays the Windows "Start" menu and task bar

Open: opens a file from the instrument ("Save/Recall" menu)

Store: stores data on the instrument ("Save/Recall" menu)

Print: defines print settings ("Print" menu)

Undo: reverts last operation

Accessing the Functionality

Summary of Contents for FSMR3000















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands