manualshive.com logo in svg

Rohde & Schwarz FSMR3000, Getting Started

Share
Download
Rohde & Schwarz FSMR3000 Getting Started Download Page 35

Instrument Tour

R&S

®

FSMR3000

35

Getting Started 1179.0100.02 ─ 01

Table 5-1: System keys

System key

Assigned functions

[Preset]

Resets the instrument to the default state.

[Setup]

Provides basic instrument configuration functions, e.g.:

●

Reference frequency (external/internal), noise source

●

Date, time, display configuration

●

LAN interface

●

Self-alignment

●

Firmware update and enabling of options

●

Information about instrument configuration incl. firmware ver-
sion and System error messages

●

Service support functions (self-test etc.)

[Print]

Provides print and screenshot functions

[File]

Provides data management functions such as saving and recall-

ing instrument settings or importing and exporting data.

Switches between the on-screen keyboard display:

●

At the top of the screen

●

At the bottom of the screen

●

Off

[Mode]

Provides the selection between applications

5.1.4

 

Touchscreen

All measurement results are displayed on the screen on the front panel. Addition-
ally, the screen display provides status and setting information and allows you to
switch between various measurement tasks. The screen is touch-sensitive, offer-
ing an alternative means of user interaction for quick and easy handling of the
instrument.

The Front Panel

Summary of Contents for FSMR3000















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands