manualshive.com logo in svg

Rohde & Schwarz FSMR3000, Getting Started

Share
Download
Rohde & Schwarz FSMR3000 Getting Started Download Page 87

Operating the Instrument

R&S

®

FSMR3000

87

Getting Started 1179.0100.02 ─ 01

7.2.3

 

Context Menus

Several items in the diagram area have context menus, such as traces, markers,
softkeys, or settings in the channel bar. If you right-click on one of these items (or
tap it for about 1 second), a menu is displayed with context-specific menu items
for the selected item.

If SCPI Recording is available, the context menu contains a link to the SCPI
recorder functions and a link to a help topic for the specific item.

For details, see the R&S

 

FSMR3 User Manual.

Figure 7-2: Context menu for a result display with SCPI Recorder functions

If SCPI Recorder functions are not available, for example for channel bar settings
or in some applications, the context menu contains functions for the selected
item. These functions correspond to the functions also provided for the item in
softkey menus. This is useful, for example, when the softkey display is hidden.

Accessing the Functionality

Summary of Contents for FSMR3000















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands