manualshive.com logo in svg

Rohde & Schwarz FSMR3000, Getting Started

Share
Download
Rohde & Schwarz FSMR3000 Getting Started Download Page 45

Instrument Tour

R&S

®

FSMR3000

45

Getting Started 1179.0100.02 ─ 01

5.2.1

 

AC Power Supply Connection and Main Power Switch

An AC power supply connector and main power switch are located in a unit on
the rear panel of the instrument.

Main power switch function:

Position 1: The instrument can be started via the Power key on the front panel.

The (optional) OCXO reference frequency is warmed up.

Position O: The entire instrument is disconnected from the AC power supply.

For details, refer to 

"Connecting to power"

 

on page 9 and 

Chapter 4.5, "Connect-

ing the AC Power"

, 

on page 19.

5.2.2

 

Display Port and DVI

You can connect an external monitor or other display device to the R&S

 

FSMR3

to provide an enlarged display. Two different types of connectors are provided for
this purpose:

●

Display Port

●

DVI (digital visual interface)

For details, see 

Chapter 4.9, "Connecting an External Monitor"

, 

on page 23.

5.2.3

 

LAN

The R&S

 

FSMR3 is equipped with a 1

 

GBit Ethernet IEEE 802.3u network inter-

face with Auto-MDI(X) functionality. The assignment of the RJ-45 connector sup-
ports twisted-pair category 5 UTP/STP cables in a star configuration (UTP stands
for 

unshielded twisted pair

, and STP for 

shielded twisted pair

).

For details, see the R&S

 

FSMR3 user manual.

5.2.4

 

USB

The rear panel provides four additional female USB (USB-A) connectors to con-
nect devices like a keyboard, a mouse or a memory stick (see also 

Chapter 5.1.2,

"USB"

, 

on page 34).

The Rear Panel

Summary of Contents for FSMR3000















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands