Rohde & Schwarz 3560.6550.06, Operating Manual

Page: 32 / 41

Operating Manual ENV216
3560.6550.12 -01- 4.2 E-1
2 STATUS
ON This LED shows that the ENV216 is powerd up.
REMOTE This LED shows that a remote control function is
active. (See also chapter 5 "Remote control")
This LED goes off automatically when all remote
control functions are inactive or the port is not
occupied.
L1, N The measurement path is selected manually using
the "L1" and "N" keys. When either key is pressed, it
releases the other. They are both locked when the
REMOTE LED is lit. The associated LEDs always
indicate the active path, even when this has been
selected using the remote control. (See also chapter
5 "Remote control")
150 kHz HP With this toggle key a 150 kHz highpass filter can be
switched into the measurement path. This enables
interference voltages in the low-frequency range,
e.g. from switch-mode power supplies, to be sup-
pressed. The associated LED lights up when
the filter is active. This key is locked when the
"REMOTE" LED is lit.
(See also chapter 5 "Remote control")
TWO-LINE V-NETWORK ENV216 3560.6550.06
1 2
3 4