Rohde & Schwarz 3560.6550.06, Operating Manual

Page: 21 / 41

ENV216 Operating Manual
3560.6550.12 -01- 3.1 E-1
3 Preparation
Unpack the device
Remove the two protective hoods from the front and rear and inspect the device carefully for any dam-
age.
If the device is damaged, you should notify the responsible freight carrier immediately and retain all
items of packaging in order to support your complaint. The original packaging is also useful for use
when shipping or transporting at a later date. You should at least keep the two protective hoods for the
front and rear, to protect against damage to the control elements and connections.
Set up the device
Before starting the ENV216 for the first time, ensure that
• a PE conductor is connected,
• the ventilation openings are unobstructed,
• no signal or operating voltages above the permissible limits are present at the inputs,
• the device's outputs are not overloaded or incorrectly connected.
Failure to comply with any of these points may damage the equipment.
Caution!
Note the instruction regarding protective grounding in chapter 3, section entitled
Protective grounding!
Warning!
The flow of air from above and below must be unimpeded at all times while the
ENV216 is in use.
As the device is equipped with ventilation apertures on its underside, it must not be
left to run unsupervised or it must be set up on a non-flammable surface (e.g. metal
plate, marble slab) to avoid fire in the event of overheating.