Rohde & Schwarz 3560.6550.06, Operating Manual

Page: 22 / 41

Operating Manual ENV216
3560.6550.12 -01- 3.2 E-1
Protective grounding
Warning!
Operating the device without protective earth may cause serious injury or death.
The direction in chapter 1 entitled "Safety direction" must be followed without excep-
tion!
Caution!
Before using for the first time, the network must be connected to an additional con-
ductor that is compliant with VDE0100.
Users must be aware that it is possible for socket connections and grounding con-
ductors to become disconnected. A further grounding conductor with adequate di-
ameter must be connected between a grounding conductor connection for the
measurement area and the grounding bolt (1) on the ENV216.
Only then may the network be connected to the mains power supply.
At shutdown, the same procedure must be followed in the reverse order:
First the ENV216 must be disconnected from the mains power supply, and only then
should the additional grounding conductor connection be removed.
Threaded bolt with butterfly nut on the rear of the device
NUR AN NETZE MIT
SCHUTZLEITER ANSCHLIESSEN
CONNECT TO MAINS SUPPLY
WITH PROTECTIVE EARTH !
47 ... 63 Hz
I = 16 A
V = 50 V
DC. max.
V = 250 V
eff. max.
max.
Ca ut i on
For laboratory use by
qualified personal
ACHTUNG
(Hoher Ableitstrom -ca. 800 mA)
Inbetriebnahme in folgender Reihenfolge:
1. Netznachbildung mit zusätzlichem Schutzleiter verbinden
2. Netzstecker mit dem zu speisenden Netz verbinden
Außerbetriebnahme:
1. Netznachbildung vom speisenden Netz trennen
2. zusätzliche Schutzleiterverbindung trennen
1