Rohde & Schwarz 3560.6550.06, Operating Manual

Page: 29 / 41

ENV216 Operating Manual
3560.6550.12 -01- 3.9 E-1
Sample measurement
The figure shows the measurement setup for measuring the RFI voltage of a handheld drill. In this ex-
ample, the handheld drill is connected to three metal foils.
Item Description
1 Metal wall, at least 2 m x 2 m
2 Equipment under test
3 Connection cable
4 Connection cable running separately to the hand simulation
5 Two-Line V-Network
6 Metallic collar capable being gripped
7 Test receiver
A Power supply connection
B
Reference ground connection, low-inductance (e.g. brass plate,
0.2 m)
P Test device connector
H Artificial Hand connector
M Test receiver connector
D Metal foils