Installation
Check-out and Power-up
Node Controller Hardware User Manual
109
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
8.
For new installations, upload the image and type files to each node controller (see the
Node Controller Interface User Manual
).
9.
For new installations, create and upload the Node Controller Configuration File for the
transport system (see
and the
MagneMover LITE
Configurator User Manual
or the
QuickStick Configurator User Manual
).
10.
If Ethernet motors are being used, create and upload the MICS file for the transport
system (see
MagneMover LITE User Man-
ual
, and the
MagneMover LITE Configurator User Manual
).
11.
Program the motors with the Motor ERF Image files (see the
Node Controller Inter-
face User Manual
).
12.
Review the log files for each node controller to make sure that the system has been
programmed and configured properly (see the
Node Controller Interface User Man-
ual
).
