Safety
Label Identification and Location
Node Controller Hardware User Manual
33
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
Label Identification and Location
Identification labels are placed on the node controllers. These labels provide operators and
service personnel with information about the node controllers at the point of use. This section
describes each label and identifies its location.
NOTE:
Label images are representational only. Actual labels include all appropriate regula-
tory symbols and can differ in appearance.
Label placement can cause labels to be visible only during maintenance operations.
The following tables list the labels that are affixed to the node controllers. The figure after
each table shows the location of each label that is identified in the table. To replace a lost or
damaged label, contact MagneMotion and reference its name.
Figure 2-1: Label Locations on the NC-S Node Controller
Table 2-4: Labels Used on the NC-S Node Controller
Product Information Label
Qty: 1
Location: On the top of the NC-S node controller
MAC ID Label
Qty: 1
Location: On the top of the NC-S node controller
S/N:?????????
1A-2B-3C-4D-5E-6F
MAC:
MAC ID
Information
Label
Label
