Rockwell Automation Allen-Bradley Guardmaster 442G-MAB B-U Series User Manual Download Page 5

Page: 5 / 68

Rockwell Automation Publication 442G-UM001B-EN-P - May 2016

Preface

Read this preface to become familiar with the rest of the manual. It provides

information concerning:

• Who would use this manual
• The purpose of this manual
• Related documentation
• Conventions that are used in this manual

Who Should Use This Manual

Use this manual if you are responsible for designing, installing, programming,

or troubleshooting systems that use the 442G Multi-functional Access Box.

You must have a basic understanding of electrical circuitry and familiarity with

safety-related systems. If you do not, obtain the proper training before using

this product.

Purpose of This Manual

This manual is a reference guide for the 442G Multi-functional Access Box. It

describes the procedures to use to install, wire, and troubleshoot the device.

This manual:

• Explains how to install and wire your 442G Multi-functional Access Box
• Provides an overview of the 442G Multi-functional Access Box

Conventions Used in This

Manual

The following conventions are used throughout this manual:

• Bulleted lists such as this one provide information, not procedural steps.
• Numbered lists provide steps or hierarchical information.

Additional Resources

These documents contain additional information concerning related products

from Rockwell Automation.

You can view or download publications at



h ttp://www.rockwellautomation.com/global/literature-library/overview.page

To order paper copies of technical documentation, contact your local

Allen-Bradley distributor or Rockwell Automation sales representative.

Resource

Description

Allen-Bradley Industrial Automation Glossary,



publication

AG-7.1

Glossary of industrial automation terms and

abbreviations

Industrial Automation Wiring and Grounding Guidelines,

publication

1770-4.1

Provides general guidelines for installing a Rockwell

Automation industrial system.

Product Certifications website,

http://

www.rockwellautomation.com/global/certification/

overview.page

Provides declarations of conformity, certificates, and

other certification details.

Summary of Contents for Allen-Bradley Guardmaster 442G-MAB B-U Series





































































Search results

Summary of Contents for Allen-Bradley Guardmaster 442G-MAB B-U Series

Reviews:

Related manuals for Allen-Bradley Guardmaster 442G-MAB B-U Series

Brands by name

Popular brands

Rockwell Automation Allen-Bradley Guardmaster 442G-MAB B-U Series, User Manual

Search results

Summary of Contents for Allen-Bradley Guardmaster 442G-MAB B-U Series

Reviews:

Related manuals for Allen-Bradley Guardmaster 442G-MAB B-U Series

Brands by name

Popular brands