Rockwell Automation Publication 440G-UM001B-EN-P - May 2016
35
Description of Operation
Chapter 4
Function of the Switches
Changing System Operation
(configuring device for standalone or series operation)
1. Switch off power supply.
2. Set DIP switches 1, 2 and 5 as shown.
3. Switch on the power supply for at least five seconds.
• The change is confirmed by the illumination of the Power status
indicator. All other status indicators are off.
4. Switch off power supply.
5. Set DIP switch five to OFF.
• The next time the device is started, the new setting will be activated.
Detail
Switch
Function
1
A
1+2
On: Device is configured for standalone operation (factory setting)
Off: Device is configured for series operation
B
3+4
On: Guard lock monitoring is deactivated
Off: Guard lock monitoring is activated (factory setting)
C
5
On: DIP switch configuration enabled
Off: DIP switch configuration inhibited (factory setting)
D
6
On: Release monitoring is activated (factory setting)
Off: Release monitoring is deactivated
IMPORTANT
The terminal assignment also changes on changing the configuration (see
Table 1 - Terminal assignment on page
Switching from series to standalone operation
Switching from standalone to series operation
1
2
3
4
5
6
A
B
C D
ON
Factory settings are
shown.
1 2
3 4
5
6
ON
1 2
3 4
5
6
ON
