Roberts Gorden Energytube EM-115, Nstallation, Operation And Service Manual

Page: 18 / 82

EM-S
ERIES
I
NSTALLATION
, O
PERATION AND
S
ERVICE
M
ANUAL
12 of 71
SECTION 6: HEATER INSTALLATION
To ens u re yo u r safety, and comply w ith the terms of
the w arranty, all u nits m u st be installed in
accordance w ith these instr u ctions.
The gas or the electrical s u pply lines m u st not be
u sed to s u pport the heater.
Do not locate the gas or electric s u pply lines directly
o v er the path of the fl u e prod u cts from the heater.
The heater m u st be installed in a location that it is
readily accessible for ser v icing.
The heater m u st be installed in accordance w ith
clearances to comb u stibles as indicated on the
heater and in this instr u ction man u al.
The gas inlet press u re m u st be maintained as
indicated on the rating plate.
Typical installation config u rations are sho w n on Page
13, Figure 11 .
Expansion and contraction of the t u be dictates that
the minim u m s u spension lengths in the table on
Page 13, Figure 11 be maintained.
WARNING
Severe Injury Hazard
Secure burner to burner tube with bolts and
lockwashers.
Hang heater with materials with a minimum
working load of 75 lbs (33 kg).
Failure to follow these instructions can result
in death, injury or property damage.
WARNING
Cut/Pinch Hazard
Wear protective gear during installation,
operation and service.
Edges are sharp.
Failure to follow these instructions can result
in injury.