Roberts Gorden Energytube EM-115, Nstallation, Operation And Service Manual

Page: 49 / 82

SECTION 10: W
IRING
43 of 71
10.3.2 Satellite Heater Confi g uration
Satellite heater config u ration is set by positioning of
j u mpers on pin block J10 located on the control board
inside the heater compartment, See Page 43, Figure
23 . J u mper position on J10, sho w n on Page 43,
Figure 23 w ill config u re heater as a satellite heater.
(The j u mper position for satellite is the same as the
j u mper position of a central heater u sing a zone
sensor). J u mper on J9 may be left alone.
FIGURE 23: Satellite Heater Jumper Settin g