Changing and calling up the programme data
10
SYCON
3000 H
Changing and calling up the programme data
General information on programming and on entering the national language
On commissioning the analyser is pro-
grammed according to the desired mode of
operation. These programme data can be
changed at a later stage. They are not erased
in the event of a power failure.
A change in the programme data should
only be carried out by an authorised spe-
cialist.
Make a note of the programme data in the
blank fields of the following flow diagram
and keep this guide in a safe place for the
operating and servicing personnel.
If changes are made during an analysis
sequence, the analysis is interrupted and
restarted.
1. Press the " KEY " key as often as necessary
until the function "PROGRM" is displayed
for the "F3" key.
9 m
|
5 , 3 1 c b m
|
2 *
L i m i t
2 . 3 p p m
> = 9 . 0
S T A R T F L U S H P R O G R M
2. Press the "PROGRM" key. If in programme
step 9.1 the question pertaining to a code
number has been answered with Yes, you
must enter a code number with the help of
the "
<<<<
"
and "#" keys.
C o d e n u m b e r
* * * *
P R O G R M
#
Only after this, press the "PROGRM" key. The
next display appears.
However, if no code number has been pro-
grammed in programme step 9.1, you must
keep the "PROGRM" key pressed for approx. 5
seconds until this display appears.
C H A N G E
p r o g r a m m / l a n g u a g e
P R O G R M
L A N G U A
E N D
3. Should you wish to change the language
of the LCD display, press the "LANGUA"
key.
E N G L I S H
E F D N l
E N D
With the help of the "
" key, move the cursor
under the letter representing the country of the
desired language.
4. If you wish to commence the program-
ming, press the "PROGRM" key.
General information on the key fun
General information on the key fun
General information on the key fun
General information on the key funcccctions:
tions:
tions:
tions:
Key
Key
Key
Key """"
""""
You reach the next programme step.
Key
Key
Key
Key """"
""""
You move backwards step-by-step.
Key
Key
Key
Key """"
""""
In the case of Yes/No decisions, you answer a
question with YES by using this key to position
the cursor beneath the "Y" for Yes; you answer
NO by positioning the cursor beneath the "N"
for No.
For numerical entries, move the cursor under
the digit to be changed.
Key
Key
Key
Key """" #
#
#
# """"
To change a numerical value and to toggle
between the displays "
----
" and " | ".
Key
Key
Key
Key """" NEXT
NEXT
NEXT
NEXT """"
To change to the next display in the same pro-
gramme step.
Key
Key
Key
Key """" KEY
KEY
KEY
KEY """"
To display an alternative key function for the
"F3" key.
Key
Key
Key
Key """" END
END
END
END """"
The programming mode is exited.
If required, further functions are explained at
the individual programme steps.
Attention!
Attention!
Attention!
Attention!
The programming mode is automatically exited
approx. 2 minutes after the last key operation.
