65
Operating and Maintenance Instructions – 6 Installation – "Getting Started"
Rittal Liquid Cooling Package Plus
Fig. 58:
Login window
You must enter a password to call up the setup window for the operation data.
This is done in the login window depicted in Fig. 58.
If nothing is entered or confirmed in the login window for more than 10 minutes,
the password is reset and it must be entered again to call up the setup window
for operation data.
Note:
Password: RiXXXXX
The five-digit number (XXXXX) is the serial number of the Basic CMC (see
page 69, table 13, “General settings for Liquid Cooling Package Plus” ).
Caution!
Never refer the password to unauthorised personnel.
The setup mode only serves for service purpose. Setting up of basic
operating parameters should be exclusively carried out by Rittal ser-
vice personnel.
