Rinnai Mirai 24, Installation And User Manual

Page: 9 / 64

www.rinnai.it 9
IMPORTANT SAFETY INFORMATION
DANGER:

Do not store flammable objects near the boiler.
- it could cause a product failure or fire.

Check that the appliance is supplied with the correct gas type and
pressure according to the data plate.
- ensure that the gas in use matches with the gas indicated on the data
plate. If not, there could be incomplete burning of the gas, resulting in
toxic emissions and/or product failure.

Do not attempt to repair, replace or open sealed parts or disassemble the boiler.
- Improper adjustment, alteration, service or maintenance could significantly affect the safety
of the product. Contact the Rinnai service if you detect any unusual condition.

Check that the flue and air inlet pipes are properly installed and in good
condition
.

Do not touch the flue pipe of the boiler when operating. Burns can occur.

In case of unusual noise, vibration or smell, stop the boiler and contact the
Rinnai service for further information.
ATTENTION:

The boiler should be installed by qualified personnel only.

Check the main gas valve to make sure it is opened before using the
boiler and check the gas pressure is correct.

Metal flexible pipes are recommended for gas and water supply. Rubber
hose might get damaged.

It is recommended to install valves on the gas and water pipes to allow an
easier maintenance and to increase safety in case of emergency.

Check the voltage at the power outlet to make sure it is within the
appropriate range before use. The extension of the power cord should be
avoided (e.g. using an extension cord or a multiple socket).

Do not block the air intake in the boiler room. Always provide a good
aeration according to regulations.