|
21
EN
20
8. COMFORT OPTIONS
We would point out that auxiliary units may only be connected to the RIKA
interface connection and external connection socket by authorised specialists.
RIKA room sensor/RIKA radio room sensor
This option permits control of your stove via room temperature. You can set
both the room temperature and the heating times required. A room temperature
selected by you is observed during the heating times.
Please see the operating instructions for the option RIKA room sensor and
wireless room sensor for more detailed information.
RIKA GSM Control
Your stove can also be controlled via a mobile phone as an additional option.
Please see the operating instructions for the telephone option – GSM for more
detailed information.
RIKA interface for various options
for various options
The RIKA ROOM SENSOR, the RIKA WIRELESS ROOM SENSOR and the RIKA
PHONE OPTION – GSM are to be connected to the interface (stove rear) using
the connection cable supplied.
External room thermostat
Your stove has an interface on the rear wall to which you can connect a
customary room thermostat. This requires a 2-pole cable of 0.5 – 0.75 mm²
cross-section that you have to connect instead of the cable bridge fitted for
delivery
External connection cable bridge
(condition as delivered)
If the control of your stove is to be assumed by an external room thermostat,
you have to connect your external room thermostat (1) instead of the standard
integrated cable bridge (2).
The connected room thermostat can be operated in either MANUAL or
AUTOMATIC MODE. In both MODES, the current set heat output is used, in
AUTOMATIC MODE the heating times set at the stove can also be activated.
You can see whether the external demand is currently activated in the INFO main
menu in submenu item Info - inputs.
If your stove receives an external demand to stop operation, it takes approx. 5
minutes until it switches off. All further settings required to your thermostat can
be taken from the respective room thermostat operating instructions.
Note
Operation is not possible unless either a cable bridge or an external room
thermostat is connected. The external demand has priority over all operating
modes (MANUAL/AUTOMATIC/COMFORT).
