18
SETUP – settings
In the SETUP – Settings main menu, heating times can be programmed, options
activated or then date and time set etc.
The required submenu is selected by pressing the corresponding button
GSM
PIN-Code
GSM
Th 15.03.2012
15:55
OFF
1234
Note
If functions are inactive due to lack of the respective module, they cannot be
selected.
SUBMENU ITEMS
Heating times
The ON and OFF switching times can be programmed in this submenu. A
decreasing temperature for the comfort mode can also be set.
Room sensor
Any deviation between the current displayed and actual room temperature can
be compensated for.
GSM
If a modem is connected, the stove GSM function can be activated and the
PinCode required entered numerically.
Frost protection
This function allows selection of a minimum temperature at which the stove
starts to heat. The frost protection function is independent of any external
requirements and any set room temperatures. The function has top priority.
Transverse current blower
The optional transverse current blower can be activated in this submenu.
Child safety device
To prevent undesired operation, a code can be determined to be entered every
time the screen saver is left.
Date/time
Date and time settings can be made.
Screen saver
The waiting interval until the screen saver is activated is set in this submenu.
USB update
This menu level concerns the software update of the stove.
Service (not accessible to final customers)
Additional information for the specialist dealer or service.
Heating time programme
The heating time programme operates the stove time-controlled. As soon
as the heating time function has been activated (ON) the buttons decreasing
temperature (only with room sensor) and heating time programme can be
selected.
Set Heating Times
Heating Times
Set Back Temp
Heating Times
Th 15.03.2012
15:55
ON
14
Individual or several days can be selected at the same time and programmed
individually in the heating time programme.
The week days selected are marked
ORANGE
.
By selecting the now active heating time buttons (heating time I and heating
time II), the required ON and OFF switching times can be entered numerically.
The week day buttons are shown
GREEN
after confirmation.
Repeat pressing of week day buttons already programmed permit viewing of
the defined heating times or these can be deleted again using the cancel button
(right next to the time displayed).
Heating Time II
Heating Time I
Heating Times
Th 15.03.2012
15:55
ON
OFF
##:## ##:##
Mo
Tu
We
Fr
Th
Sa
Su
20:15 21:45
Tip
In the case of selected week days on which identical heating times have been
programmed, the respective settings of heating time I and/or heating time II
are shown.
If week days with different heating times have been selected then the hash
symbol appears in the time display (##:##).
