|
19
EN
18
INFO - main menu
The most important current parameters can be viewed in INFO – main menu.
Parameters
Info
Th 15.03.2012
15:55
Input
Output
SUBMENU ITEMS
Inputs
All available sensor data and switch statuses are shown.
Outputs
All components controlled by the microprocessor are shown.
Parameters
All operating parameters are shown
INFO – inputs
328
ON
OFF
Input
Th 15.03.2012
15:55
Flame Temp [°C]
External Request
Door Switch
Flame temperature
Display of the current temperature of the combustion chamber [°C]
Room temperature
Display of the current ACTUAL temperature in the room [°C](only with connected
room sensor)
Ext. demand
Displays whether an external demand is active (ON) or inactive (OFF).
Dump grate contact
Displays whether the dump grate is in the horizontal position (ON).
Door contact switch
Shows whether the combustion chamber door is closed (ON) or open (OFF).
Container lid
Shows whether the pellet container lid is closed (ON) or open (OFF).
INFO – outputs
ON
OFF
810
Output
Th 15.03.2012
15:55
Ignition
Grid Motor
Air Control Box [inc]
Discharge motor
Current speed of screw motor conveying away from the pellet container (range:
0…1000)
Feed motor
Current speed of screw motor conveying to the fire trough (range: 0…1000)
Flue gas blower
Current speed of flue gas blower. (Range: 0…2500)
Ignition element
Shows whether the ignition is switched on (ON) or switched off (OFF).
Dump grate motor
Shows whether the dump grate motor is actuated (ON) or not (OFF).
Air controller
Current air flap position (range: 0…1000)
INFO – parameters
48
5
23
Parameters
Th 15.03.2012
15:55
Operat. Hours Pellets
Operat. Hours Logs
Ignition Counter
Hours in operation
Display of previous total operating hours.
Conveying total
Display of total pellet amount supplied up to present.
Conveyor cleaning
Display of the amount of pellets to be conveyed until the next cleaning.
Ignitions
Current number of all previous pellet ignitions.
Software stove
Current stove control software version.
Software display
Current software version of the touch display.
Main state
Operating status of main control process.
Sub state
Operating status of sub control process.
