Rigol DSG5000 Series Programming Manual Download Page 106

Page: 106 / 144

Description

Queries the number of files and folders under the specified path.

Parameter

Name

Type

Range

Default

<path>

ASCII String

Valid path

Remarks

The parameter <path> can be the local memory (Disk C) or external memory (Disk D,
available when a USB storage device is connected to the front-panel USB Host
interface), or the folders under Disk C or D.

Return Format

The query returns an integer. For example, 2.

Example

:MMEM:CAT:LENG? C: /*The query returns the number of files and

folders under Disk C.*/

3.5.3

:MMEMory:COPY

Syntax

:MMEMory:COPY

file_source>,<file_destination>

Description

Copies the file or folder specified by <file_source> to the destination path specified
by <file_destination>.

Parameter

Name

Type

Range

Default

<file_source>

ASCII String

File or folder to be copied

<file_destination> ASCII String

Valid destination path

Remarks

•

The parameter <file_source> denotes the file or folder to be copied. The file or

folder name must contain the path. The parameter <file_destination> indicates

the destination path and does not include the filename.

Command System

Summary of Contents for DSG5000 Series













































































































































Search results

Summary of Contents for DSG5000 Series

Reviews:

Brands by name

Popular brands

Rigol DSG5000 Series, Programming Manual

Search results

Summary of Contents for DSG5000 Series

Reviews:

Brands by name

Popular brands