Rigol DSA1030, User Manual

Page: 137 / 287

Front Panel Key Reference RIGOL
User’s Guide for DSA1000 Series 2-83

If Delta, Delta Pair, or Span Pair is selected, the center frequency will be set
to the frequency at which the Delta Marker is located.

The function is invalid in Zero span mode.
2.5.2.2 Mkr->Step
Sets the center frequency step of the analyzer based on the frequency of the current
marker.

If Normal is selected, the center frequency step will be set to the frequency of
current marker.

If Delta, Delta Pair or Span Pair is selected, the center frequency step will be
set to the frequency at which the Delta Marker is located.

The function is invalid in Zero span mode.
2.5.2.3 Mkr->Start
Sets the start frequency of the analyzer based on the frequency of the current marker.

If Normal is selected, the start frequency will be set to the frequency of the
current marker.

If Delta, Delta Pair or Span Pair is selected, the start frequency will be set to
the frequency at which the Delta Marker is located.

The function is invalid in Zero span mode.
2.5.2.4 Mkr->Stop
Sets the stop frequency of the analyzer based on the frequency of the current marker.

If Normal is selected, the stop frequency will be set to the frequency of the
current marker.

If Delta, Delta Pair or Span Pair is selected, the stop frequency will be set to
the frequency at which the Delta Marker is located.

The function is invalid in Zero span mode.