Rigol DSA1030, User Manual

Page: 236 / 287

RIGOL Troubleshooting
5-14 User’s Guide for DSA1000 Series
5.2.2.3 Device Specific Error
Number Error Description
-300
Device-specific error.
This is the generic device-dependent error for devices that cannot
detect more specific errors. This code indicates only that a
Device-Dependent Error as defined in IEEE 488.2, 11.5.1.1.6 has
occurred. Please report the error to your
RIGOL sales or technical
support team.
-310 System error.
Indicates that some error, termed “system error” by the device, has
occurred. Please report the error to your
RIGOL
sales or technical
support team.
-311 Memory error.
Indicates that local C disc is not formatted or an error occurred when
self-checking. If restarting the device is still of no effect, please report
the error to your
RIGOL sales or technical support team.
-313 Calibration memory lost.
Indicates that the data before delivery or last valid calibration data has
been lost. Please report the error to your
RIGOL sales or technical
support team.
-314 Save/recall memory lost.
Indicates that the nonvolatile data saved by the *SAV? command has
been lost.
-315 Configuration memory lost.
Indicates that nonvolatile configuration data saved by the device has
been lost.
-321 Out of memory.
An internal operation needed more memory than was available. Please
report the error to your
RIGOL sales or technical support team.
-330 Self-test failed.
Failure to self-test, for more information please refer to the result of the
Self-test.
-340 Calibration failed.
Failure to calibrate. Please report the error to your
RIGOL sales or
technical support team.
-350 Queue overflow.
A specific code entered into the queue in lieu of the code that caused