Rigol DSA1030, User Manual

Page: 215 / 287

Remote Control RIGOL
User’s Guide for DSA1000 Series 4-1
4 Remote Control
At least two means can be used to control the analyzer in Remote Mode:
User-defined programming
Users can program and control the analyzer by using the SCPI (Standard Commands
for Programmable Instruments) commands. For more information about the
commands and programming, refer to the Programming Guide.
Use PC software to send SCPI commands
Users can use the PC software Ultra Sigma of
RIGOL to send SCPI commands to
control the spectrum analyzer remotely.
In this chapter, we will give the detailed description of how to use Ultra Sigma to
control the analyzer via USB, LAN, or GPIB (expanded by the USB-GPIB module
supplied by
RIGOL ). To get the Ultra Sigma software, please contact RIGOL .
Subjects in this chapter:

Remote Control Via USB

Remote Control Via LAN

Remote Control Via GPIB