Rigol DSA1030, User Manual

Page: 227 / 287

Troubleshooting RIGOL
User’s Guide for DSA1000 Series 5-5
5.2.1 Information Message
Number Error Description
1
PictBridge printer connected.
PictBridge printer has already been connected successfully and is
waiting for initialization.
2 PictBridge printer installed successfully.
PictBridge printer has already been installed successfully and is ready
for printing.
3 PictBridge printer disconnected.
4 Printing task finished.
5 Printing task paused.
Printing task has to be paused as an error, please solve the problem
and select RESUME. For the source of error please refer to the Message
List.
6 Printing task stopped.
An error occurred when printing, please select “Cancel” to stop the print
job.
7 Printing task canceled.
8 Printing task resumed.
10 USB Disk connected.
The USB storage device has already been connected and is waiting for
initialization.
11 USB Disk installed successfully.
12 USB Disk removed.
13 Start updating firmware.
Updating firmware, please wait and keep the connection between the
USB storage device and the analyzer. For more information about
updates, please refer to the Service Manual or report the error to your
distributor or to your
RIGOL
technical support.
14 Updating firmware completed.
Updating firmware is finished, the new firmware program will be
executed automatically as soon as you restart the device.
15 Saving file completed.
16 To Recover file existed.
17 Load data with old revision.
Loading data from the old edition to the current, which may cause a