39
2. Replace the battery pack.
Remove the battery pack from the battery box by sliding it lightly in direction
③
(Figure 6).
3-3 Setting Up the Instrument
1. Connect the power cord to the power cable receptacle on the station.
2. Make sure
that the power switch on the station is set to OFF (“○” side), and
plug the power plug into a power outlet.
3.
On the station, set the power switch to ON (“|” side). The power indicator lamp
will light.
4. Install the battery pack onto the main unit.
5. Mount the main unit on the station and charge the battery pack. (Fully
charging the battery from an uncharged state takes about 120 minutes.)
•
When using the battery pack for the first time, be sure to charge it. The
battery pack is not charged at the time of purchase.
6. Install the print paper roll onto the printer.
(See “9
-
2 Replacing the Print Roll”)
7. Connect the printer to the station.
Tilt the printer and align the sticker position on the
top left of the printer to the arrows on the top right
of the station (see the figure on the right).
8. Turn on the power switches on both the station and printer.
Press the feed switch to feed the print paper to an appropriate
length.
•
The printer can be operated using the battery pack.
Figure (6)
