42
CAUTION
When connecting a printer to the station, make sure to use the one provided with
Retinomax 3 or Retinomax K-plus 3.
Do not use the printer provided with Retinomax, Retinomax K-plus, Retinomax 2
or Retinomax K-plus 2.
3. The printer battery pack charges automatically.
When the charging begins, the printer charge lamp on the station lights up.
If charging is not needed, the lamp goes out after a few seconds. It continues to
be lit if charging is needed. (Maximum charging duration: 120 minutes)
4. When the charging is completed, the charge lamp for printer goes out.
3-4-3 Charging a Spare Battery Pack
Set the battery pack you want to charge in the battery box of the printer, as
described in “3
-2-
2 Installing and Removing the Printer Battery Pack”.
Follow the same charging procedure described in “3
-4-2 Automatic Charging of the
Printer”.
When the charging is complete, remove the battery pack.
3-5 Power Supply from the Station
Using the optional DC cord, the Retinomax3can be operated without battery power.
CAUTION
•
Place the station and printer on a flat surface. If placed on an unstable location,
the station and printer may not connect properly.
•
When the printer unit is connected to the station and the power is on, the
station will constantly monitor the battery pack level. If the capacity becomes
low due to natural discharge, the battery pack will be automatically recharged,
keeping it above a certain level.
•
Charging time varies depending on theage of the batteries, etc.
Do not use any other means than our
designated DC cord.
