66
5. When the measurement of one eye ends, the quick measurement mode is
automatically disabled.
The following are the conditions for the disabling of the measurement with the
automatic quick function.
Conditions
1
Measurement of one eye with the automatic measurement mode ends
2
Measurement is suspended by pressing the start switch
3
The right/left eye identification is switched
4
A key operation is done during measurement
5
The measurement is completed
6. When the auto quick
function being activated, “AQ” is printed on the measured
data.
•
In the Auto quick measurement mode, refractive measurement takes about
half the ordinary time, but measurement values tend to vary more widely.
This indicates that the measurement
was performed with the auto quick
function
Sample printout
