50
6. The measurement results appear on the screen.
7. Once started, the measurement can be executed repeatedly
The measurement is interrupted when the start switch is pressed again. The
start switch can be pressed once again to resume the measurement beginning
from the point just before the interruption.
8. The measurement continues until it automatically ends, with the monitor
screen appearing as shown in the figure below. (The figure below is an example
of a measurement of the right eye.) If you want to re-measure the same eye,
press the start switch.
9. Perform the same procedure to measure the other eye. The measurement
begins automatically, so there is no need to press the start switch. (The figure
belowis an example of a measurement ofthe left eye.)
10. When both eyes are measured, representative values appear in the viewfinder.
If you want to continue with the measurement, repeat the procedure from Step
4.
Sample screen at measurement end (right eye)
Sample screen at measurement end (left eye)
Sample screen after measurement of both eyes
Sample screen during measurement
Ref measurement values
