38
3. Make sure that
▽
mark on the battery pack faces direction
④
.
Put in place a new battery pack by simultaneously hooking over the four lugs
(circled in Figure 3), and then slide in direction
⑤
until the pack is secured in
the grip.
4. Put the grip cover in place by sliding it in the opposite direction from
direction
②
in Figure 1.
CAUTION
3-2-2 Installing and Removing the Printer Battery Pack
●
Replacing the battery pack
The printer can be operated on battery power using the optional battery pack (the
same model as in the main unit). It should be charged and set in the battery box of
the printer.
.
1. Install the battery pack
Make sure that
▽
mark on the battery pack faces in direction
①
(Figure 5).
Put the new battery pack in place by simultaneously hooking over the four
lugs (shown circled in Figure 5), and then sliding it in direction
②
until the
pack is secured in the battery box.
The printer is not shipped with a battery pack.
To run the printer on battery power, you must purchase an optional battery
pack.
Battery pack contact
(two)
Battery back being refit
①
Lugs
Figure (5)
•
Make sure to put on the grip cover before operate the unit
