32DPF702.A
2 - 15
2. CONTROL
PANEL
WIRING
WARNING!
MAKE SURE THAT THE POWER SOURCE IS DISCONNECTED WHEN
ROUTING WIRES. THERE IS DANGER OF ELECTRIC SHOCK IF THE
POWER SOURCE IS NOT DISCONNECTED.
a. Refer
to
Figure 2-25
. Locate motor cable and controller signal cables located behind the control panel.
FIGURE 2-25
b. Refer to Crimped Terminal sections for installation of crimped terminals.
c. Refer
to
Figure 2-26
. Connect the plugs and the caps of the connectors firmly as shown on
Figure 2-26
.
6 Poles Controller
Signal Cable
2 Poles
Motor Cable
3 Poles
Controller
Signal Cable
