Ricoh VT3500, Service Manual

Page: 56 / 330

The machine also checks the paper size on the paper feed table (both the
length and width).
When the paper width is smaller than the original width (multiplied by the
reproduction ratio), the machine indicates "Check paper size" on the
operation display for 3 seconds when the Master Making key is pressed. If
the operator ignores the indication and presses the Master Making key again,
the machine goes ahead with normal processing.
If the original size is different from the paper size, the machine compares the
length of the original and paper. The master’s length will be the shorter of the
two. The machine runs the same procedure for the width. (The original length
is detected by scanning the original.)
1 December 1993
2-20