Ricoh VT3500, Service Manual

Page: 179 / 330

10.2.3 Master Eject Box Indicator
Condition Guidance Display Message
The master eject box is not set. SET THE MASTER EJECT BOX
The master eject box is full. (When
the pressure plate is lowered, the full
master detection sensor does not turn
on.) EMPTY MASTER
EJECT BOX
NOTE:
1. The Master Eject Box indicator does not turn on during machine
operation.
2. When this indicator turns on, masters cannot be made, but prints can be
made.
3. The above message is not displayed in the following cases:
•
The machine is in make-up mode, user program mode, image shifting
mode, or directional magnification mode.
•
Cover open indicator is on.
•
Machine is in operation.
4. The master eject box indicator turns off when the master eject box is set
or the Reset key is pressed after the master eject box is removed.
10.2.4 Ink Supply Indicator
Condition Guidance Display Message
During the printing process, the ink
detecting pin does not detect ink on
the ink roller for 20 drum rotations. LOAD
NEW INK CARTRIDGE
NOTE:
1. In the following cases the above message is not displayed:
•
Cover open indicator ON
•
Key counter indicator ON
•
Master box indicator ON
•
Machine is in operation
2. When the Reset key is pressed after the ink supply indicator turns on, the
drum rotates 40 times. When ink is detected during drum rotation, the
drum stops rotating and the ink supply indicator turns off.
1 December 1993
2-143