Ricoh VT3500, Service Manual

Page: 182 / 330

10.2.10 Paper Wrap Message 1
Condition Guidance Display Message
1st paper exit sensor does not turn
ON after printing pressure sensor
turns on. PAPER WRAP JAM
REMOVE JAMMED PAPER
Printing pressure sensor is on
(printing pressure is applied) when the
main SW is turned on.
NOTE:
When the Reset key is pressed, if both the printing pressure sensor and the
1st Paper Exit sensors are OFF, the jam indicator turns off.
10.2.11 Paper Wrap Message 2
Condition Guidance Display Message
2nd paper exit sensor does not turn
on after the 1st paper exit sensor
turns on. PAPER WRAP JAM
REMOVE JAMMED PAPER
NOTE:
When the Reset key is pressed, if both printing pressure sensor and 1st
paper exit sensors are OFF, jam indicator turns off.
10.2.12 Master Clamp Error Message
Condition Guidance Display Message
When the main SW is turned on,
master buckle sensor is ON. MASTER FEED JAM
REMOVE JAMMED MASTER
Master clamper fails to clamp the
master.
During master making process, cover
is opened or Stop key is pressed
before master is clamped.
NOTE:
When the Reset key is pressed, if the master buckle sensor is OFF, the jam
indicator turns off.
B + E +
E +
C +
1 December 1993
2-146