98
Ti-P1 Training
Slide 98
New ITB Unit Detection
If the machine detects an unbroken fuse [1] immediately after the ITB unit
is installed, the machine blows the fuse, and resets the life counter for the
ITB.
Immediately after this, the machine detects a blown fuse, and the life
counter starts.
The paper transfer roller is also replaced at the same time, if the user PM
kit is used.
However, if the only one of the parts is changed, counters must be reset
as explained later in this part of the course.
The machine checks for replacement detection at the following three times:
¾
Turning on the Main power
¾
Returning from sleep mode
¾
Closing the Front Cover or Upper Cover
