87
Ti-P1 Training
Slide 87
Duplex Interleaving
1. Sheet 1 is fed as shown on the left, with side 1 printed on it.
2. Then it is fed back into the machine, where it waits at the duplex
intermediate roller (controlled by the duplex intermediate clutch).
3. While sheet 1 waits there, sheet 2 is fed up along the same path
as the first sheet, with side 3 printed on it.
4. Then, while sheet 2 is being fed back into the machine, sheet 1,
now with side 2 also printed on it, comes back up to the exit. It
feeds out below the inverter roller at the same time that sheet 2
feeds back into the machine above the inverter roller.
Duplex Intermediate Roller (Drive): Item 7 in the diagram on the Vertical
Feed Path slide a few slides ago.
